STEREO COMPONENT AMPLIFIER INSTALLATION


  1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET


    1. A0199WW

      Install the amplifier with bracket with the 2 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

    2. Connect the connector.

    3. Attach the clamp.

  2. INSTALL AMPLIFIER COVER


    1. A019BMA

      Attach the 2 clips to install the cover.

  3. INSTALL FRONT SEAT ASSEMBLY RH


    1. for Manual Seat:

      Install the front seat assembly RH Click here.

    2. for Power Seat:

      Install the front seat assembly RH Click here.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.