MULTIPLEX TILT AND TELESCOPIC ECU REMOVAL


  1. REMOVE STEERING WHEEL ASSEMBLY


    1. Remove the steering wheel assembly Click here.

  2. REMOVE LOWER NO. 2 STEERING COLUMN COVER

    A00OR5D

    1. Detach the 4 claws and remove the lower No. 2 steering column cover.

  3. REMOVE STEERING COLUMN COVER

    Note

    Removing the steering column cover in an incorrect order will cause the steering column cover to break.


    1. A00OVRA

      Push the right and left sides of the lower steering column cover and detach the 4 claws.

    2. A00OUY7

      Insert fingers into the service hole of the lower steering column cover to detach the claw.

      Tech Tips

      Spread the claw to detach it.

    3. A00OQO0

      Turn the lower steering column cover to detach the 2 claws and remove the lower steering column cover as shown in the illustration.

  4. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU

    A003CZB

    1. Remove the nut and multiplex tilt and telescopic ECU from the steering column assembly.

    2. Disconnect the 2 connectors and wire harness clamp.