FRONT BRAKE DISASSEMBLY


  1. REMOVE CYLINDER BOOT


    1. A003D30

      Using a screwdriver, remove the cylinder boot from the disc brake cylinder assembly.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Be careful not to damage the brake piston or cylinder.

  2. REMOVE FRONT DISC BRAKE PISTON


    1. A003E85

      Place a piece of cloth between the piston and disc brake cylinder assembly.

    2. Apply compressed air to remove the piston from the disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the piston when using compressed air.

      Note

      Do not allow any brake fluid to spatter.

  3. REMOVE PISTON SEAL


    1. A003CJH

      Using a screwdriver, remove the piston seal from the disc brake cylinder assembly.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

  4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG