BRAKE PEDAL REMOVAL


  1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Tech Tips

    Refer to the instructions for removal of the upper instrument panel sub-assembly Click here.

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


    1. Remove the lower No. 1 instrument panel airbag assembly Click here.

  3. REMOVE BRAKE PEDAL RETURN SPRING


    1. A00E848E01

      Remove the brake pedal return spring from the brake pedal support sub-assembly.

  4. REMOVE PUSH ROD PIN


    1. A00EARLE01

      Remove the clip and push rod pin from the brake pedal lever.

  5. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. Remove the stop light switch assembly Click here.

  6. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY


    1. A00EB6VE01

      Remove the bolt and separate the brake pedal support sub-assembly from the instrument panel reinforcement.

    2. Remove the 4 nuts and brake pedal support sub-assembly.

      Tech Tips

      Model Washer Size
      Type A 15.5 mm (0.610 in.)
      Type B 20.0 mm (0.787 in.)

      The sizes of washers are different for Type A and Type B.

      A00E7YTE01
    3. A00E72I

      Remove the nut from the brake pedal support sub-assembly.