BRAKE PEDAL STROKE SENSOR REMOVAL


  1. INSPECT DRIVE AWAY RELEASE FUNCTION


    1. for 1AD-FTV:

      Click here

    2. for 2AD-FTV:

      Click here

    3. for 2AD-FHV:

      Click here

  2. PRECAUTION

    CAUTION:

    Be sure to read the "PRECAUTION" thoroughly before servicing Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • w/ Navigation System for HDD:

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


    1. Remove the lower No. 1 instrument panel airbag assembly Click here.

  5. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY (CLUTCH PEDAL STROKE SENSOR)


    1. A00ORZ0E01

      Disconnect the sensor connector.

    2. for LHD:

      Remove the 2 bolts and sensor.

      Note

      Do not drop the sensor. If the sensor has been dropped, replace the sensor with a new one.

    3. for RHD:

      Remove the 2 nuts and sensor.

      Note

      Do not drop the sensor. If the sensor has been dropped, replace the sensor with a new one.