TIRE AND WHEEL SYSTEM INSPECTION


  1. INSPECT TIRE


    1. Check the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure
      Tire Size Vehicle Speed Front Rear
      205/60R16 92V

      Driving below 160 km/h

      (100 mph)

      250 kPa (2.5 kgf/cm2, 37 psi)

      220 kPa (2.2 kgf/cm2, 32 psi)

      Driving over 160 km/h

      (100 mph)

      280 kPa (2.8 kgf/cm2, 41 psi)

      250 kPa (2.5 kgf/cm2, 37 psi)
      215/55R17 94W

      Driving below 160 km/h

      (100 mph)

      240 kPa (2.4 kgf/cm2, 35 psi)

      230 kPa (2.3 kgf/cm2, 34 psi)

      Driving over 160 km/h

      (100 mph)

      280 kPa (2.8 kgf/cm2, 41 psi)

      270 kPa (2.7 kgf/cm2, 40 psi)

      215/55R17 94W

      (for Eco Package)

      Driving below 160 km/h

      (100 mph)

      270 kPa (2.7 kgf/cm2, 40 psi)

      250 kPa (2.5 kgf/cm2, 37 psi)

      Driving over 160 km/h

      (100 mph)

      310 kPa (3.1 kgf/cm2, 45 psi)

      290 kPa (2.9 kgf/cm2, 43 psi)
      225/45R18 95W

      Driving below 160 km/h

      (100 mph)

      270 kPa (2.7 kgf/cm2, 40 psi)

      230 kPa (2.3 kgf/cm2, 34 psi)

      Driving over 160 km/h

      (100 mph)

      310 kPa (3.1 kgf/cm2, 45 psi)

      270 kPa (2.7 kgf/cm2, 40 psi)
      T145/70D17 106M -

      420 kPa (4.2 kgf/cm2, 60 psi)
    2. A003D53

      Using a dial indicator, check the runout of the tires.

      Tire runout
      1.0 mm (0.0394 in.) or less

  2. ROTATE TIRE

    A003CNXE01

    Tech Tips

    Rotate the tires as shown in the illustration.

  3. INSPECT WHEEL BALANCE


    1. Check and perform off-car balancing.

    2. If required, perform on-car balancing.

      Imbalance after adjustment
      8.0 g (0.018 lb.) or less

  4. INSPECT FRONT AXLE HUB BEARING


    1. Inspect the front axle hub bearing Click here.

  5. INSPECT REAR AXLE HUB BEARING


    1. Inspect the rear axle hub bearing Click here.