DIFFERENTIAL OIL SEAL REPLACEMENT


  1. REMOVE FRONT DRIVE SHAFT ASSEMBLY


    1. Remove the front drive shaft assembly Click here.

  2. REMOVE DRIVE SHAFT BEARING BRACKET


    1. A006X76

      Remove the 3 bolts and bearing bracket.

  3. REMOVE TRANSAXLE CASE OIL SEAL


    1. A00OSBTE01

      Using SST, remove the transaxle case oil seal.

      SST
      09308-00010

  4. REMOVE FRONT TRANSAXLE CASE OIL SEAL


    1. A00OSEUE01

      Using SST, remove the front transaxle case oil seal.

      SST
      09308-00010

  5. INSTALL TRANSAXLE CASE OIL SEAL


    1. Coat the lip of a new oil seal with MP grease.

    2. A00OTBDE01

      Using SST and a hammer, tap in the transaxle case oil seal to the manual transaxle case.

      SST
      09608-10010
      09950-70010   ( 09951-07200 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Do not damage the oil seal lip.

  6. INSTALL FRONT TRANSAXLE CASE OIL SEAL


    1. Coat the lip of a new oil seal with MP grease.

    2. A00OQDWE01

      Using SST and a hammer, tap in the front transaxle case oil seal to the front transaxle case.

      SST
      09608-32010
      09950-70010   ( 09951-07200 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Do not damage the oil seal lip.

  7. INSTALL DRIVE SHAFT BEARING BRACKET


    1. A00OSSS

      Install the bearing bracket with the 3 bolts.

      Torque:
      64 N*m  { 653 kgf*cm, 47 ft.*lbf }

  8. INSTALL FRONT DRIVE SHAFT ASSEMBLY


    1. Install the front drive shaft assembly Click here.

  9. INSPECT FOR OIL LEAK