SHIFT AND SELECT LEVER SHAFT REASSEMBLY


  1. INSTALL CONTROL SHAFT COVER OIL SEAL


    1. A019FG2E02

      Using SST and a hammer, install a new control shaft cover oil seal to the control shaft cover.

      SST
      09307-12010
      Standard depth
      0 to 0.5 mm (0 to 0.0196 in.)

    2. Coat the lip of the oil seal with MP grease.

  2. INSTALL SHIFT LEVER DAMPER


    1. A019GJY

      Coat the 2 bolts with adhesive.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

    2. Install the shift lever damper to the shift and select lever shaft with the 2 bolts.

      Torque:
      19 N*m  { 190 kgf*cm, 14 ft.*lbf }

  3. INSTALL PIN


    1. A019F07

      Install the 2 pins to the inner No. 1 shift lever.

  4. INSTALL SHIFT GATE PLATE


    1. A019F1L

      Install the shift gate plate with the 2 bolts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  5. INSTALL SHIFT AND SELECT LEVER SHAFT


    1. Coat the shift and select lever boot lip with MP grease.

    2. A019HQG

      Install the shift and select lever boot and control shaft cover to the select lever shaft.

  6. INSTALL INNER NO. 1 SHIFT LEVER


    1. A019JC1

      Install the inner No. 1 shift lever and shift interlock plate to the shift and select lever shaft.

    2. A019F1H

      Using a 5 mm pin punch and hammer, tap the slotted spring pin into the inner No. 1 shift lever.

      Standard depth
      0.4 to 1.4 mm (0.0158 to 0.0551 in.)

  7. INSTALL SHIFT AND SELECT LEVER ASSEMBLY


    1. A019HSYE02

      Align the 4 shift fork shafts as shown in the illustration.

    2. A019GQJE05
      Text in Illustration
      *1 Seal Packing

      Apply seal packing to the manual transmission case, as shown in the illustration.

      Seal packing
      Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent

    3. Coat the 4 bolts with adhesive.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
    4. A019HQI

      Install the shift and select lever assembly to the manual transmission case with the 4 bolts.

      Torque:
      19 N*m  { 190 kgf*cm, 14 ft.*lbf }

  8. INSTALL SHIFT GATE PIN


    1. A019IKP

      Coat the shift gate pin with adhesive.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

    2. Install the shift gate pin to the manual transmission case.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

  9. INSTALL NO. 2 LOCK BALL ASSEMBLY


    1. A019GLZ

      Coat the No. 2 lock ball with adhesive.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

    2. Install the No. 2 lock ball to the manual transmission case.

      Torque:
      29 N*m  { 300 kgf*cm, 22 ft.*lbf }

  10. INSTALL NO. 1 LOCK BALL ASSEMBLY


    1. A019IAP

      Coat the No. 1 lock ball with adhesive.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

    2. Install the No. 1 lock ball to the manual transmission case.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

  11. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A019JIME01

      Using SST, install a new gasket and the park/neutral position switch to the manual transmission case.

      SST
      09816-30010
      Torque:
      40 N*m  { 410 kgf*cm, 30 ft.*lbf }

  12. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY


    1. A019IO9E03

      Using SST, install a new gasket and the back-up light switch onto the manual transmission case.

      SST
      09816-30010
      Torque:
      40 N*m  { 410 kgf*cm, 30 ft.*lbf }

  13. INSTALL NO. 1 SELECTING BELLCRANK DUST COVER


    1. A019HD9

      Install the No. 1 selecting bellcrank dust cover to the selecting bellcrank.

  14. INSTALL CONTROL SHIFT LEVER BUSHING


    1. A019I26

      Install the control shift lever bushing to the selecting bellcrank.

  15. INSTALL SHIFT SELECTING BELLCRANK ASSEMBLY


    1. A019I7G

      Install the selecting bellcrank assembly to the manual transmission case with the 2 bolts.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }