CLUTCH ACCUMULATOR REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

  4. REMOVE FRONT LOWER BUMPER ABSORBER


    1. A00OVPY

      Remove the 4 screws and 2 bolts.

    2. A00OUR6

      Remove the 8 bolts and 3 screws.

    3. Detach the 2 hooks of the front lower bumper absorber from the installation holes on the body and remove the front lower bumper absorber.

  5. REMOVE NO. 1 ENGINE UNDER COVER


    1. A00ORDS

      Remove the 11 clips the engine under cover.

  6. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A00OVQR

      Remove the 7 clips and radiator support opening cover.

  7. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. A00OQGF

      Remove the bolt and loosen the nut.

    2. Detach the hook of the battery clamp from the battery carrier, and then remove the battery clamp.

  8. REMOVE BATTERY

  9. REMOVE BATTERY TRAY

  10. REMOVE BATTERY CARRIER


    1. A00OU72

      Detach the 2 clamps and disconnect the wire harness.

    2. Remove the 4 bolts and battery carrier.

  11. REMOVE CLUTCH ACCUMULATOR ASSEMBLY

    A00OQP6

    1. Using a union nut wrench, separate the clutch release cylinder to accumulator tube from the clutch accumulator assembly.

      Tech Tips

      Use a container to catch the fluid.

    2. Using a union nut wrench, disconnect the accumulator to flexible hose tube from the clutch accumulator assembly and flexible hose.

      Tech Tips

      Use a container to catch the fluid.

    3. Remove the bolt and accumulator to flexible hose tube from the clutch accumulator assembly.

    4. Remove the clip and separate the flexible hose from the clutch accumulator assembly.

    5. A00OS5T

      Remove the 3 bolts and clutch accumulator assembly.