POWER WINDOW CONTROL SYSTEM DIAGNOSTIC TROUBLE CODE CHART
Tech Tips
If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
| DTC Code | Detection Item | Trouble Area | See page |
|---|---|---|---|
| B2311 | Power Window Motor Malfunction | - Front door window regulator LH - Front door window regulator RH - Rear door window regulator LH* - Rear door window regulator RH* - Battery disconnection when ignition switch ON - Incorrect installation of power window components - Overheated door window regulator motor |
|
| B2312 | Power Window Switch Malfunction | - Power window regulator master switch - Power window regulator switch - Front door window regulator LH - Front door window regulator RH - Rear door window regulator LH* - Rear door window regulator RH* - Harness or connector malfunction - Power window regulator master switch held in same position for more than 20 sec. - Power window regulator switch than 20 sec. |
|
| B2313 | Glass Position Initialization Incomplete | - Front door window regulator LH - Front door window regulator RH - Rear door window regulator LH* - Rear door window regulator RH* - Door window regulator motor is not initialized |
*: w/ Rear Power Window