FRONT CONSOLE BOX (w/o Console Box Lid) INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL CONSOLE BOX ASSEMBLY


    1. Install the console box with the 2 screws.

    2. w/ Power Outlet Socket:


      1. Connect the connectors.

    3. Install the 4 bolts.

      A003DYOE01

  2. INSTALL CONSOLE BOX CARPET


    1. Install the 3 carpets.

  3. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL

  4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A006UDU

      Attach the 2 claws and 6 clips to install the console panel.

    2. A006VCT

      Attach the cover to the shaft.

  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A003D3G

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. A00E70T

      Attach the 4 clips and 5 claws to install the panel end.

  7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips and 5 claws to install the panel end.

      A00E7Y2E01

  8. INSTALL NO. 3 BOX PANEL


    1. When replacing the No. 3 box panel with a new one:


      1. A003DNZE01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. A003AMQ

      Attach the 6 clips to install the box panel.

  9. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A00EANQE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  10. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. A00E9NPE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.