ROOF HEADLINING (for Sedan) REASSEMBLY


  1. INSTALL AMPLIFIER ANTENNA ASSEMBLY


    1. Align the marking tape on the antenna cord with the roof headlining tabs shown in A and B, and wrap tape around the cord to install it.

    2. Starting from the front of the vehicle, attach the antenna cord to the roof headlining with tape at the 6 marked locations labeled "a".

    3. While adjusting the slack of the antenna cord, attach the antenna cord to the roof headlining with tape at the marked location labeled "b".

      A003AIQE01

  2. INSTALL NO. 1 ROOF WIRE


    1. Fix the No. 1 roof wire in place by wrapping tape around the No. 1 roof wire and the protrusion of the roof headlining as shown in the part of the illustration labeled A.

    2. Position the joint boxes as shown in the illustration and set the No. 1 roof wire on the roof headlining.

    3. Attach tape at the locations shown in the illustration to install the No. 1 roof wire.

      Tech Tips

      Apply sufficient pressure when placing tape.

    4. Turn the visor connectors approximately 90° clockwise to install them to the roof headlining.

      A006X4FE01

  3. INSTALL NO. 6 ROOF SILENCER PAD (for Cold Area)

    A006WMZE01
    Text in Illustration
    *1 Silencer Marking

    1. Align the No. 6 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 6 roof silencer pads using double-sided tape as shown in the illustration.

  4. INSTALL NO. 3 ROOF SILENCER PAD

    A006UBPE01
    Text in Illustration
    *1 Silencer Marking

    1. Align the No. 3 roof silencer pad with the silencer marking on the roof headlining and install the No. 3 roof silencer pad using double-sided tape as shown in the illustration.

  5. INSTALL NO. 2 ROOF SILENCER PAD

    A006V79E01
    Text in Illustration
    *1 Silencer Marking

    1. Align the No. 2 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 2 roof silencer pads using double-sided tape as shown in the illustration.

  6. INSTALL NO. 1 ROOF SILENCER PAD

    A006W4DE01
    Text in Illustration
    *1 Silencer Marking

    1. Align the No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 3 No. 1 roof silencer pads using double-sided tape as shown in the illustration.

  7. INSTALL VANITY LIGHT ASSEMBLY

    A006U3DE05

    Tech Tips

    Use the same procedure to install the vanity light on the other side.


    1. Attach the 3 claws to install the vanity light.

  8. INSTALL LENS COVER (for Cold Area)

    A006V4W

    Tech Tips

    Use the same procedure to install the lens cover on the other side.


    1. Install the lens cover.