AIR CONDITIONING PANEL REMOVAL


  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. A00OSNCE01
      Text in Illustration
      *1 Protective Tape
      *2 Clamp
      *3 Guide

      Place protective tape as shown in the illustration.

    2. Using a moulding remover B, detach the 2 clips and 5 claws.

    3. Detach the clamp.

    4. Detach the guide near the front of the vehicle and remove the finish panel.

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A00OURCE01
      Text in Illustration
      *1 Protective Tape
      *2 Clamp
      *3 Guide

      Place protective tape as shown in the illustration.

    2. Using a moulding remover B, detach the 2 clips and 5 claws.

    3. Detach the clamp.

    4. Detach the guide near the front of the vehicle and remove the finish panel.

  3. REMOVE NO. 3 BOX PANEL


    1. Place protective tape as shown in the illustration.

      A010O5SE02
      Text in Illustration
      *1 Protective Tape

    2. Using a moulding remover B, detach the 6 clips and remove the box panel.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. Using a moulding remover B, detach the 4 clips and 5 claws and remove the panel end.

      A00OQEVE01

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for LHD)


    1. A00OSPV

      Using a moulding remover B, detach the 4 clips and 5 claws and remove the panel end.

  6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for RHD)


    1. w/o TOYOTA Parking Assist-sensor System:


      1. Using a moulding remover B, detach the 4 clips and 5 claws and remove the panel end.

    2. w/ TOYOTA Parking Assist-sensor System:


      1. Using a moulding remover B, detach the 4 clips and 5 claws.

      2. Remove the panel end and then disconnect the connector.

        A00OW4UE01

  7. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY (w/ Audio)


    1. A00ORQBE01
      Text in Illustration
      *1 Protective Tape

      Place protective tape as shown in the illustration.

    2. Using a moulding remover B, detach the 2 clips and hook.

    3. A00OR17

      Detach the 3 claws and 3 hooks.

    4. Detach the 2 clips.

    5. A00OVXQ

      Remove the panel register. Then disconnect the connector and detach the clamp.

  8. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY (w/o Audio)


    1. A00OTE6E01
      Text in Illustration
      *1 Protective Tape

      Place protective tape as shown in the illustration.

    2. Using a moulding remover B, detach the 2 clips and hook.

    3. A00ORNX

      Detach the 3 claws and 3 hooks.

    4. Detach the 6 clips.

    5. A00OVXQ

      Remove the panel register. Then disconnect the connector and detach the clamp.

  9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    1. A010Q2K

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  10. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)


    1. A010OCE

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  11. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)


    1. A010Q3P

      Detach the cover.

    2. A010RBQ

      Using a moulding remover B, detach the 2 claws.

    3. Detach the 6 clips and remove the console panel.

  12. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transaxle)


    1. A010N3B

      Using a moulding remover B, detach the 2 claws.

    2. Detach the 6 clips.

    3. Remove the console panel and then disconnect the connector.

  13. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A010PX0

      Using a moulding remover B, detach the 2 clips.

    2. A010S1UE01
      Text in Illustration
      *1 w/ Seat Heater System

      Remove the finish panel and then disconnect the connectors.

  14. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

    A010QG3

    1. Using a moulding remover, detach the 4 clips.

    2. Disconnect the connector and remove the air conditioning control.