FRONT SEAT INNER BELT ASSEMBLY INSPECTION


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

    A006U6DE03
    Text in Illustration
    *1

    Component without harness connected

    (Front Seat Inner Belt)

    1. w/o Pre-crash Safety System:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2

      Seat belt fastened

      (Buckle switch is on)

      		 1 MΩ or higher
      1 - 2

      Seat belt unfastened

      (Buckle switch is off)

      		 Below 1 Ω

      If the result is not as specified, replace the inner belt assembly.

    2. A006UOKE01
      Text in Illustration
      *1

      Component without harness connected

      (Front Seat Inner Belt)

      w/ Pre-crash Safety System:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4

      Seat belt fastened

      (Buckle switch is on)

      		 1 MΩ or higher
      3 - 4

      Seat belt unfastened

      (Buckle switch is off)

      		 Below 1 Ω

      If the result is not as specified, replace the inner belt assembly.

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    A006V28E01
    Text in Illustration
    *1

    Component without harness connected

    (Front Seat Inner Belt)

    		 *3 Connector B
    *2 Connector A - -

    1. w/o Pre-crash Safety System:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A1 - B3 Always Below 1 Ω
      A2 - B1

      Seat belt fastened

      (Buckle switch is on)

      		 1 MΩ or higher
      A2 - B1

      Seat belt unfastened

      (Buckle switch is off)

      		 Below 1 Ω

      If the result is not as specified, replace the inner belt assembly.

    2. w/ Pre-crash Safety System:

      Measure the resistance according to the value(s) in the table below.

      A006TT3E01
      Text in Illustration
      *1

      Component without harness connected

      (Front Seat Inner Belt)

      		 *3 Connector B
      *2 Connector A - -
      Standard Resistance
      Tester Connection Condition Specified Condition
      A4 - B3 Always Below 1 Ω
      A3 - B1

      Seat belt fastened

      (Buckle switch is on)

      		 1 MΩ or higher
      A3 - B1

      Seat belt unfastened

      (Buckle switch is off)

      		 Below 1 Ω

      If the result is not as specified, replace the inner belt assembly.