POWER WINDOW MASTER SWITCH INSPECTION


  1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Rear Door Power Window)

    A003ENHE01
    Text in Illustration
    *1

    Component without harness connected

    (Power Window Regulator Master Switch)

    1. Check that the LED illuminates.


      1. Apply battery voltage to the master switch and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 18 (LED)

        Battery negative (-) → 12 (GND)

        		 LED illuminates

        • If the result is not as specified, replace the power window regulator master switch.

  2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/o Rear Door Power Window)

    A003EFLE01
    Text in Illustration
    *1

    Component without harness connected

    (Power Window Regulator Master Switch)

    1. Check that the LED illuminates.


      1. Apply battery voltage to the master switch and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 18 (LED)

        Battery negative (-) → 12 (GND)

        		 LED illuminates

        • If the result is not as specified, replace the power window regulator master switch.