POWER WINDOW CONTROL SYSTEM Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch

DESCRIPTION



INSPECTION PROCEDURE

PROCEDURE


  1. CHECK FOR DTC


    1. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC is not output A
      B2311 is output B
      B2312 is output C
      B2313 is output D
      LIN communication system DTCs are output E

    B
    C
    D
    E
    A
  2. CHECK MANUAL UP/DOWN FUNCTION


    1. Check that the driver side door power window moves when the manual up/down function of the power window regulator master switch is operated Click here.

      OK
      Driver side door power window moves.

    NG
    OK
  3. READ VALUE USING INTELLIGENT TESTER (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY)


    1. Use the Data List to check if the master switch is functioning properly Click here.

      Master Switch
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D Door P/W Auto SW Driver side power window auto up/down signal / ON or OFF

      ON: Driver side power window auto up/down switch operated

      OFF: Driver side power window switch not operated

      -
      OK
      Display changes according to operation of power window regulator master switch.
      Result
      Result Proceed to
      OK (for LHD) A
      OK (for RHD) B
      NG C

    B
    C
    A