WATER PUMP INSTALLATION


  1. INSTALL WATER PUMP ASSEMBLY


    1. Remove the adhesive from the threads of the bolt and the bolt hole of the timing chain cover.

    2. A003CYU

      Install a new gasket to the timing chain cover so that the protrusions indicated by the arrows in the illustration are aligned.

    3. A003EEXE01
      Text in Illustration
      *1 Adhesive

      Apply adhesive to 2 or 3 threads of the bolt labeled A shown in the illustration.

      Standard Bolt Length
      Item Specified Condition
      Bolt A and C 45 mm (1.77 in.)
      Bolt B 30 mm (1.18 in.)
      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
    4. A003BJB

      Install the water pump with the 2 bolts indicated by the arrows in the illustration.

      Torque:
      23 N*m  { 229 kgf*cm, 17 ft.*lbf }
    5. A003CR0

      Install the 5 bolts.

      Torque:
      23 N*m  { 229 kgf*cm, 17 ft.*lbf }

  2. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY


    1. A003D6P

      Install the No. 2 idler pulley and idler pulley cover plate with the bolt.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  3. INSTALL ENGINE ASSEMBLY


    1. Install the engine assembly Click here.