DIFFERENTIAL PRESSURE SENSOR INSTALLATION


  1. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY


    1. A003AJ5E01

      Connect the 2 vacuum hoses.

      Note

      Connect the vacuum hoses so that the painted marks of the 2 vacuum hoses are as shown in the illustration.

    2. A003ASH

      Install the sensor with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Connect the sensor connector and attach the wire harness clamp.

  2. INSTALL COWL TOP VENTILATOR LOUVER


    1. Install the cowl top ventilator louver Click here.