EGR BYPASS VALVE SWITCHING VALVE REMOVAL


  1. REMOVE COWL TOP VENTILATOR LOUVER

    Click here

  2. REMOVE NO. 1 ENGINE COVER


    1. A00ORGX

      Hold the rear of the cover and slowly raise it to detach the clip on the rear of the cover. Continue to raise the cover to detach the 3 clips on the front and side of the cover and remove the cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  3. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY


    1. A00OV8YE01
      Text in Illustration
      *a Pinch

      Pinch the clip as shown in the illustration, and pull out the VSV connector.

    2. A00OR7I

      Disconnect the 2 vacuum hoses.

    3. Using a 4 mm hexagon socket wrench, remove the 2 bolts and VSV.