MONOLITHIC CONVERTER REMOVAL


  1. REMOVE ENGINE ASSEMBLY

    Click here

  2. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    1. A00OSDD

      Remove the 5 bolts and No. 1 manifold converter insulator.

  3. REMOVE MANIFOLD STAY


    1. A00OUQN

      Remove the bolt, nut and manifold stay.

  4. REMOVE NO. 2 MANIFOLD STAY


    1. A00OUX2

      Remove the 3 bolts and No. 2 manifold stay.

  5. REMOVE NO. 2 EXHAUST MANIFOLD STAY


    1. A00OR9S

      Remove the 2 bolts, nut and No. 2 exhaust manifold stay.

  6. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. A00OV5A

      Disconnect the 2 connectors.

    2. A00OQH9

      Remove the 3 nuts and exhaust manifold converter.

    3. Remove the gasket from the turbocharger.

  7. REMOVE VACUUM TRANSMITTING HOSE ASSEMBLY

    A00OVCY

  8. REMOVE NO. 2 VACUUM TRANSMITTING HOSE ASSEMBLY

    A00OUSL

  9. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Upper Side)

    Note

    If the sensor is dropped, replace it with a new one.


    1. A00OVCI

      Detach the sensor connector clamp.

    2. Using a 14 mm union nut wrench, loosen the union nut.

    3. Remove the nut, clamp and sensor.

  10. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Lower Side)

    Note

    If the sensor is dropped, replace it with a new one.


    1. A00OUFK

      Detach the sensor connector clamp.

    2. Using a 14 mm union nut wrench, remove the sensor.

  11. REMOVE NO. 1 VACUUM PIPE


    1. A00OQED

      Using a 17 mm union nut wrench, loosen the union nut.

    2. Remove the bolt and No. 1 vacuum pipe.

  12. REMOVE NO. 2 VACUUM PIPE


    1. A00OT43

      Using a 14 mm union nut wrench, loosen the union nut.

    2. Remove the bolt and No. 2 vacuum pipe.

  13. REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR


    1. A00OTNH

      Remove the 3 bolts and No. 2 manifold converter insulator.