VACUUM REGULATING VALVE REMOVAL


  1. REMOVE COWL TOP VENTILATOR LOUVER

    Click here

  2. REMOVE NO. 1 ENGINE COVER


    1. A00ORGX

      Hold the rear of the cover and slowly raise it to detach the clip on the rear of the cover. Continue to raise the cover to detach the 3 clips on the front and side of the cover and remove the cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  3. REMOVE VACUUM REGULATING VALVE ASSEMBLY


    1. Disconnect the vacuum regulating valve connector.

    2. A00OQVH

      Disconnect the 2 vacuum hoses.

    3. Remove the 2 bolts and vacuum regulating valve.