INJECTOR DRIVER REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A003DQW

      Hold the rear of the cover and slowly raise it to detach the clip on the rear of the cover. Continue to raise the cover to detach the 3 clips on the front and side of the cover and remove the cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  2. REMOVE ENGINE ROOM SIDE COVER


    1. A003B3G

      Remove the clip and engine room side cover.

  3. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A006V84

      Remove the 8 clips and radiator support opening cover.

  4. REMOVE INJECTOR DRIVER


    1. A003D0I

      Detach the clamp and disconnect the 4 injector driver connectors.

    2. A003AVP

      Remove the 3 bolts and injector driver.

    3. A003DOV

      Remove the 4 screws and injector driver bracket.