AIR FUEL RATIO SENSOR INSTALLATION


  1. INSTALL AIR FUEL RATIO SENSOR


    1. A010PHZE01

      Using SST, install the air fuel ratio sensor.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips


      • Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

      • Make sure SST and the wrench are connected in a straight line.

    2. Connect the air fuel ratio sensor connector and clamp.

    3. A010N8S

      Install the harness clamp.

  2. INSPECT FOR EXHAUST GAS LEAK


    1. Check that there are no exhaust gas leaks from the points (connection areas of the exhaust pipes and installation areas of each sensor) shown in the illustration.

      A00E806

  3. PERFORM INITIALIZATION


    1. Perform A/F sensor compensation code reset.