INTAKE AIR TEMPERATURE SENSOR REMOVAL


  1. REMOVE FRONT LOWER BUMPER ABSORBER


    1. A003EIP

      Remove the 4 screws and 2 bolts.

    2. A003ALH

      Remove the 8 bolts and 3 screws.

    3. Detach the 2 hooks of the front lower bumper absorber from the installation holes on the body and remove the front lower bumper absorber.

  2. REMOVE ENGINE UNDER COVER


    1. A003BQH

      Remove the 11 clips the engine under cover.

  3. REMOVE INTAKE AIR TEMPERATURE SENSOR


    1. A003BD5

      Disconnect the sensor connector.

    2. Using a 22 mm ball joint lock nut wrench, remove the sensor and gasket.