MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION


  1. INSTALL DIESEL TURBO PRESSURE SENSOR


    1. A003BH0E01
      Text in Illustration
      *1 Protrusion

      Install the sensor with the bolt.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

      Note

      Make sure the protrusion of the gas filter bracket is inserted into the hole of the sensor.

    2. Connect the sensor connector.

    3. Connect the vacuum hose.

  2. INSTALL NO. 1 ENGINE COVER


    1. A003DQW

      Attach the 4 clips to install the No. 1 engine cover.