INTAKE AIR TEMPERATURE SENSOR INSTALLATION


  1. INSTALL INTAKE AIR TEMPERATURE SENSOR


    1. A006W8I

      Install a new gasket to the sensor.

    2. Using a 22 mm ball joint lock nut wrench, install the sensor.

      Torque:
      34 N*m  { 350 kgf*cm, 25 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench Click here.

    3. Connect the sensor connector.

  2. INSTALL ENGINE UNDER COVER


    1. A00EB0Y

      Install the engine under cover with the 11 clips.

  3. INSTALL FRONT LOWER BUMPER ABSORBER


    1. A00E73K

      Insert the 2 hooks of the front lower bumper absorber into the installation holes on the body to install the front lower bumper absorber .

    2. Install 8 bolts and 3 screws.

    3. A00E7US

      Install the 4 screws and 2 bolts.