ACCELERATOR PEDAL INSTALLATION


  1. INSTALL ACCELERATOR PEDAL ROD

    Note


    • Be careful not to drop the accelerator pedal rod.

    • Do not disassemble the accelerator pedal rod.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or lubricant to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal rod must be replaced.


    1. A010OXOE01

      Install the accelerator pedal rod with the 2 bolts.

      Torque:
      8.7 N*m  { 89 kgf*cm, 77 ft.*lbf }

    2. Connect the accelerator pedal position sensor connector.