TCM INSTALLATION


  1. INSTALL TCM


    1. Install the TCM to the transaxle.

    2. A00OQZFE01

      Install and tighten the 2 bolts in the order shown in the illustration.

      Torque:
      11 N*m  { 115 kgf*cm, 8 ft.*lbf }
    3. A00OVKUE01

      Connect the connector to the TCM.

    4. Turn the lock lever until the claw of the connector makes a connection sound and secure the connector with the lock lever.

  2. INSTALL REAR ENGINE UNDER COVER LH


    1. Install the rear engine under cover LH with the 5 clips.

  3. INSTALL BATTERY CARRIER


    1. Install the battery carrier with the 4 bolts.

      Torque:
      19 N*m  { 189 kgf*cm, 14 ft.*lbf }

    2. Attach the 2 clamps to connect the wire harness.

  4. INSTALL BATTERY


    1. Install the battery tray.

    2. Install the battery.

    3. Install the battery clamp with the bolt and tighten the nut.

      Torque:
      for bolt
      17 N*m  { 168 kgf*cm, 12 ft.*lbf }
      for nut
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

    4. Connect the cable to the positive (+) battery terminal.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL RADIATOR SUPPORT OPENING COVER


    1. Install the radiator support opening cover with the 7 clips.