DIFFERENTIAL OIL SEAL REPLACEMENT


  1. REMOVE FRONT LOWER BUMPER ABSORBER


    1. A006VZN

      Remove the 4 screws and 2 bolts.

    2. A006W5E

      Remove the 8 bolts and 3 screws.

    3. Detach the 2 hooks of the front lower bumper absorber from the installation holes on the body and remove the front lower bumper absorber.

  2. REMOVE NO. 1 ENGINE UNDER COVER


    1. A006TQR

      Remove the 11 clips the engine under cover.

  3. REMOVE REAR ENGINE UNDER COVER LH


    1. Remove the 5 clips and under cover.

  4. REMOVE REAR ENGINE UNDER COVER RH


    1. Remove the 5 clips and under cover.

  5. DRAIN AUTOMATIC TRANSAXLE FLUID


    1. Remove the refill plug and gasket from the automatic transaxle.

    2. A00E8OR

      Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the automatic transaxle.

    3. A00E9TXE04

      Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the automatic transaxle and drain the automatic transaxle fluid.

    4. Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the automatic transaxle.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Hexagon Socket Wrench
      *3 Overflow Plug Hole

    5. Using a 6 mm socket hexagon wrench, install a new gasket and the overflow plug to the automatic transaxle.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

    6. Temporarily install the gasket and the refill plug to the automatic transaxle.

  6. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH AND RH


    1. Remove the front drive shaft LH and RH Click here.

  7. REMOVE DRIVE SHAFT BEARING BRACKET


    1. A006X76

      Remove the 3 bolts and bearing bracket.

  8. REMOVE TRANSAXLE CASE OIL SEAL LH

    A00E7OKE04

    1. Using SST, tap out the transaxle case oil seal.

      SST
      09308-00010

  9. REMOVE TRANSAXLE CASE OIL SEAL RH

    A00EB76E02

    1. Using SST, tap out the transaxle case oil seal.

      SST
      09308-00010

  10. INSTALL TRANSAXLE CASE OIL SEAL LH

    A00E6T4E02

    1. Using SST and a hammer, tap in a new transaxle case oil seal.

      SST
      09316-10010
      09950-70010   ( 09951-07100 )
      Oil seal driven in depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Check that the oil seal is installed in the correct direction.

    2. Coat the lip of the transaxle case oil seal with MP grease.

  11. INSTALL TRANSAXLE CASE OIL SEAL RH

    A00E8RSE02

    1. Using SST and a hammer, tap in a new transaxle case oil seal.

      SST
      09316-60011   ( 09316-00011 )
      Oil seal driven in depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Check that the oil seal is installed in the correct direction.

    2. Coat the lip of the transaxle case oil seal with MP grease.

  12. INSTALL DRIVE SHAFT BEARING BRACKET


    1. A00OSSS

      Install the bearing bracket with the 3 bolts.

      Torque:
      64 N*m  { 653 kgf*cm, 47 ft.*lbf }

  13. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH AND RH


    1. Install the front drive shaft LH and RH Click here.

  14. ADD AUTOMATIC TRANSAXLE FLUID


    1. Add automatic transaxle fluid Click here.

  15. INSTALL REAR ENGINE UNDER COVER RH


    1. A00OQG7

      Install the under cover with the 5 clips.

  16. INSTALL REAR ENGINE UNDER COVER LH


    1. Install the under cover with the 5 clips.

  17. INSTALL NO. 1 ENGINE UNDER COVER


    1. A00EB0Y

      Install the engine under cover with the 11 clips.

  18. INSTALL FRONT LOWER BUMPER ABSORBER


    1. A00E73K

      Insert the 2 hooks of the front lower bumper absorber into the installation holes on the body to install the front lower bumper absorber .

    2. Install 8 bolts and 3 screws.

    3. A00E7US

      Install the 4 screws and 2 bolts.