CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A00ORGX

      Hold the rear of the cover and slowly raise it to detach the clip on the rear of the cover. Continue to raise the cover to detach the 3 clips on the front and side of the cover and remove the cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  2. REMOVE CAMSHAFT POSITION SENSOR


    1. for DPF:

      Detach the wire harness clamp.

    2. A00OSO8E01
      Text in Illustration
      *A for DPF
      *B for CCo

      Disconnect the sensor connector.

    3. Remove the bolt and sensor.