SPEED LIMITER SYSTEM ROAD TEST


  1. INSPECT SET FUNCTION


    1. Turn the warning canceling switch on.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. A003DME

      Press the cruise control switch to -SET.

    4. Check that the vehicle speed is limited to the set speed.

  2. INSPECT ACCELERATION FUNCTION


    1. Turn the warning canceling switch on.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. A003DME

      Press the cruise control switch to -SET.

    4. A003DOD

      Check that the vehicle limit speed increases by 5 km/h or 5 mph at regular intervals while the cruise control switch is pushed to +RES , and that the vehicle speed is limited to the newly set speed when the switch is released.

    5. Momentarily press the cruise control switch upward to +RES and then immediately release it. Check that the vehicle speed increases by about 1 km/h or 1 mph (Tap-up function).

  3. INSPECT COAST FUNCTION


    1. Turn the warning canceling switch on.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. A003DME

      Press the cruise control switch to -SET.

    4. Check that vehicle limit speed decreases by 5 km/h or 5 mph at regular intervals while the cruise control switch is pushed to -SET, and that the vehicle speed is limited to the newly set speed when the switch is released.

    5. Momentarily press the cruise control switch downward to -SET, and then immediately release it. Check that the vehicle speed decreases by about 1 km/h or 1 mph (Tap-down function).

  4. INSPECT CANCEL FUNCTION


    1. Turn the warning canceling switch on.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. A003DME

      Press the cruise control switch to -SET.

    4. When performing one of the following, check that the speed limiter system is canceled and that the normal driving mode is reset.


      • Turning the warning canceling switch off

      • A003DH4

        Pushing the cruise control switch on

      • A003AQD

        Pulling the cruise control switch to CANCEL

  5. INSPECT RESUME FUNCTION


    1. Turn the warning canceling switch on.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. A003DME

      Press the cruise control switch to -SET.

    4. A003AQD

      Pulling the cruise control switch to CANCEL.

    5. A003DOD

      After the cruise control switch is pulled up to +RES at a driving speed of more than 30 km/h or 20 mph or more, check that the vehicle restores the speed before the cancellation.

  6. INSPECT OVERRIDE FUNCTION


    1. Turn the warning canceling switch on.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. A003DME

      Press the cruise control switch to -SET.

    4. Fully depress the accelerator pedal and check that the vehicle accelerates beyond the limit speed.