IGNITION SWITCH REMOVAL


  1. REMOVE STEERING COLUMN ASSEMBLY


    1. for Power Tilt and Power Telescopic Steering Column:

      Remove the steering column assembly Click here.

    2. for Manual Tilt and Manual Telescopic Steering Column:

      Remove the steering column assembly Click here.

  2. REMOVE UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY


    1. Secure the steering column assembly in a vise.

    2. Using a center punch, mark the center of the tapered-head bolt.

    3. Using a 3 to 4 mm (0.12 to 0.16 in.) diameter drill bit, drill a hole in the tapered-head bolt.

    4. A003CQVE02
      Text in Illustration
      *1 Screw Extractor

      Using a screw extractor, remove the tapered-head bolt, and then remove the steering column upper with switch bracket assembly from the steering column assembly.

  3. REMOVE IGNITION SWITCH ASSEMBLY


    1. A003CGY

      Remove the 2 screws and ignition switch.