STARTER (for VALEO Made) DISASSEMBLY


  1. REMOVE MAGNET STARTER SWITCH ASSEMBLY


    1. A003BPI

      Remove the nut and disconnect the lead wire from terminal C.

    2. A003C69

      Using a T20 "TORX" socket wrench, remove the 2 screws holding the magnet starter switch to the starter drive housing.

    3. Remove the magnet starter switch.

    4. A003E84

      Remove the return spring.

    5. A003DVD

      Remove the plate and boot.

    6. A003CB3

      Remove the rubber seal.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. A003ANH

      Remove the 2 bolts.

    2. A003E92

      Remove the starter yoke from the starter drive housing.

  3. REMOVE STARTER CLUTCH SUB-ASSEMBLY


    1. A003CB4

      Remove the starter pinion drive lever with starter drive lever pin from the starter clutch.

    2. Remove the starter pinion drive lever from the starter drive lever pin.

    3. A003DVG

      Using a screwdriver with the tip taped, remove the starter clutch from the starter yoke.

  4. REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY


    1. A003C0P

      Remove the starter commutator end frame from the yoke.

  5. REMOVE STARTER BRUSH HOLDER ASSEMBLY


    1. A003DYK

      Remove the starter brush holder from the starter armature.

  6. REMOVE STARTER ARMATURE ASSEMBLY


    1. A003DWI

      Remove the starter armature from the starter yoke.