СИСТЕМА АВТОМАТИЧЕСКОЙ ТРАНСМИССИИ (для моделей с 3ZR-FE) ПРОВЕРКА РУЧНОГО ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ

  1. MANUAL SHIFTING TEST

    Tech Tips

    • Through this test, it can be determined whether the trouble occurs in an electrical circuit or if it is a mechanical problem in the transaxle.

    • If any abnormalities are found in the following test, the problem is in the transaxle itself.

    1. Disconnect the transmission wire connector.

      A005RA1

    2. Drive the vehicle with the transmission wire disconnected. Move the shift lever to each position to check whether the gear position changes as shown in the table below.

      Shift Lever Position Gear Position
      D No Shift (Does Not Change)
      P P
      R R

      Tech Tips

      When driving with the transmission wire disconnected and the shift lever in D, the gear position is held in 3rd. However, when the shift lever is in R or P, the operation is the same as during normal operation.

    3. Connect the connector of the transmission wire.

    4. Clear the DTCs Click here.