СТАРТЕР СНЯТИЕ

  1. REMOVE RADIATOR SUPPORT OPENING COVER

    1. A005RJS

      Remove the 9 clips and radiator support opening cover.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    1. Loosen the nut and disconnect the cable.

      Note

      When disconnecting the cable some systems need to be initialized after the cable is reconnected Click here.

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

    1. Loosen the nut and disconnect the cable.

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    1. Remove the bolt and loosen the nut.

    2. Detach the hook of the battery clamp from the battery carrier, and then remove the battery clamp.

  5. REMOVE BATTERY

  6. REMOVE BATTERY TRAY

  7. REMOVE BATTERY CARRIER

    1. A005RI3

      Disconnect the 2 wire harness protector clamps.

    2. Remove the 4 bolts and battery carrier.

  8. REMOVE STARTER ASSEMBLY

    1. Disconnect the starter connector.

      A005RRH

    2. Open the terminal cap, remove the nut and disconnect the starter wire.

    3. A005VY7

      Remove the 2 bolts and starter.