НАСОС СИСТЕМЫ ОХЛАЖДЕНИЯ СНЯТИЕ

REMOVE ENGINE ROOM SIDE COVER

1. Remove the clip and engine room side cover.

   

REMOVE RADIATOR SUPPORT OPENING COVER

1. Remove the 8 clips and radiator support opening cover.

   

REMOVE NO. 2 CYLINDER HEAD COVER

1. 

   Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

   Note

   Attempting to detach both front and rear clips at the same time may cause the cover to break.

REMOVE REAR ENGINE UNDER COVER RH

1. Снимите 5 фиксаторов и правую защиту картера.

   

DRAIN ENGINE COOLANT

1. Loosen the radiator drain cock plug.

   Tech Tips

   Collect the coolant in a container and dispose of it according to the regulations in your area.

2. Remove the reserve tank cap.

   CAUTION:

   Do not remove the reserve tank cap while the engine and radiator are still hot.

   Pressurized, hot engine coolant and steam may be released and cause serious burns.

   

   Text in Illustration

   *1

   Reserve Tank Cap

   *2

   Radiator Drain Cock Plug

REMOVE V-RIBBED BELT

1. Ослабьте болты A и В.

   

2. Ослабьте болт C и снимите поликлиновой ремень.

   Note

   Не ослабляйте болт D.

REMOVE GENERATOR ASSEMBLY

1. Снимите заглушку контакта.

   

2. Отверните гайку и отсоедините жгут проводов от контакта B.

3. Отсоедините разъем и зажим жгута проводов.

4. Ослабьте 3 болта.

   

5. Выверните 2 болта и снимите натяжную пластину.

   

6. Выверните болт и снимите генератор.

   

7. Выверните болт и снимите кронштейн зажима жгута проводов.