КЛАПАН ПРИНУДИТЕЛЬНОЙ ВЕНТИЛЯЦИИ КАРТЕРА УСТАНОВКА

  1. INSTALL VENTILATION VALVE SUB-ASSEMBLY

    1. A00DQRFE10

      Apply adhesive to 2 or 3 threads of the ventilation valve.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
    2. A00DSKGE01

      Using a 22 mm deep socket wrench, install the ventilation valve.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }
      Text in Illustration
      *1 22 mm Deep Socket Wrench

  2. CONNECT NO. 2 VENTILATION HOSE

    1. Connect the ventilation hose to the ventilation valve.

      A00DTH5E01

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    1. Установите крышку и закрепите ее 2 гайками.

      A00DS8Z
      Torque:
      9,0 Н*м  { 92 кгс*см, 80 фунт-сила-дюймов }

  4. INSTALL COWL TOP VENTILATOR LOUVER

    1. Install the cowl top ventilator louver Click here.

  5. INSPECT FOR OIL LEAK

    1. Start the engine. Make sure that there are no oil leaks from the area that was worked on.