ТОПЛИВНЫЙ НАСОС ПОВТОРНАЯ СБОРКА

  1. INSTALL FUEL PUMP

    1. A005SH2

      Connect the fuel pump harness connector.

    2. A005W31E02

      Install the fuel pump spacer to the fuel pump assembly.

      Text in Illustration
      *1 Fuel Pump Spacer

    3. Apply gasoline to a new O-ring and install the O-ring to the fuel pump.

      Text in Illustration
      *2 New O-Ring

    4. Attach the 5 claws to the holes to install the fuel pump.

      A005R7A

      Note

      • Do not remove the suction filter.

      • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

    5. Attach the 2 claws to the holes to install the No. 1 fuel suction support.

      A005RXM

    6. Attach the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

      A005WBF

    7. Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      A005RHQ

      Note

      Do not apply excessive force to the fuel tube or the suction support.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY

    1. A005TJB

      Установите датчик уровня топлива в сборе, сдвинув его вниз.

    2. A005RND

      Подсоедините 2 зажима жгута проводов.

    3. Установите защитный кожух жгута проводов.

      Note

      Будьте осторожны, чтобы не повредить жгут проводов.

    4. Подсоедините разъем датчика уровня топлива в сборе.