ДАТЧИК УРОВНЯ ТОПЛИВА В СБОРЕ ПРОВЕРКА

  1. INSPECT FUEL SENDER GAUGE ASSEMBLY

    1. A005W3YE01

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Float Level F 12 to 18 Ω
      Float Level Between E and F 15 to 410 Ω (Gradually changes)
      Float Level E 405 to 415 Ω
      Text in Illustration
      *1

      Front view of wire harness connector

      (to Fuel Sender Gauge Assembly)

      If the result is not as specified, replace the fuel sender gauge assembly.