РЕГУЛЯТОР ДАВЛЕНИЯ В ТОПЛИВНОЙ СИСТЕМЕ УСТАНОВКА

INSTALL FUEL PUMP

1. 

   Connect the fuel pump harness connector.

2. 

   Install the fuel pump spacer to the fuel pump assembly.

   Text in Illustration

   *1	Fuel Pump Spacer

3. Apply gasoline to a new O-ring and install the O-ring to the fuel pump.

   Text in Illustration

   *2	New O-Ring

4. Attach the 5 claws to the holes to install the fuel pump.

   

   Note

   • Do not remove the suction filter.

   • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

5. Attach the 2 claws to the holes to install the No. 1 fuel suction support.

   

6. Attach the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

   

7. Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

   

   Note

   Do not apply excessive force to the fuel tube or the suction support.

INSTALL FUEL SENDER GAUGE ASSEMBLY

1. 

   Install the fuel sender gauge assembly by sliding it downward.

2. 

   Connect the 2 harness clamps.

3. Install the harness protector.

   Note

   Do not damage the wire harness.

4. Connect the connector of the fuel sender gauge assembly.