ДАТЧИК ТЕМПЕРАТУРЫ ОХЛАЖДАЮЩЕЙ ЖИДКОСТИ СНЯТИЕ

REMOVE ENGINE ROOM SIDE COVER

1. Remove the clip and engine room side cover.

   

REMOVE RADIATOR SUPPORT OPENING COVER

1. Remove the 8 clips and radiator support opening cover.

   

DRAIN ENGINE COOLANT

1. Loosen the radiator drain cock plug.

   Tech Tips

   Collect the coolant in a container and dispose of it according to the regulations in your area.

2. Remove the reserve tank cap.

   CAUTION:

   Do not remove the reserve tank cap while the engine and radiator are still hot.

   Pressurized, hot engine coolant and steam may be released and cause serious burns.

   

   Text in Illustration

   *1

   Reserve Tank Cap

   *2

   Radiator Drain Cock Plug

REMOVE NO. 2 CYLINDER HEAD COVER

1. 

   Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

   Note

   Attempting to detach both front and rear clips at the same time may cause the cover to break.

REMOVE AIR CLEANER CAP SUB-ASSEMBLY

1. 

   Disconnect the mass air flow meter connector.

2. Detach the wire harness from the 2 clamps.

3. Disconnect the 2 clamps.

   

4. Disconnect the ventilation hose.

   

5. Loosen the band and remove the air cleaner cap.

REMOVE AIR CLEANER CASE SUB-ASSEMBLY

1. 

   Detach the wire harness clamp from the air cleaner case.

2. Remove the 3 bolts and air cleaner case.