БЛОК ДВИГАТЕЛЯ СНЯТИЕ

  1. REMOVE IGNITION COIL ASSEMBLY

    1. Disconnect the 4 ignition coil connectors.

    2. A005THR

      Remove the 4 bolts and 4 ignition coils.

  2. REMOVE WATER BY-PASS HOSE

    1. A00DPMJ

      Remove the 2 water by-pass hoses.

  3. REMOVE THROTTLE BODY ASSEMBLY

    1. A00DS1R

      Disconnect the No. 2 fuel vapor feed hose.

    2. Remove the 4 bolts and throttle body.

    3. A00DPIB

      Remove the gasket from the intake manifold.

  4. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY

    1. Disconnect the 2 wire harness clamps.

      A00DRZT

    2. Disconnect the 4 fuel injector connectors.

    3. Remove the 2 bolts and pull out the fuel delivery pipe together with the 4 fuel injectors.

      A00DT2U

      Note

      Be careful not to drop the fuel injectors when removing the fuel delivery pipe.

    4. Remove the 2 delivery pipe spacers from the cylinder head.

      A00DUG5

    5. Remove the 4 insulators from the cylinder head.

  5. REMOVE FUEL INJECTOR ASSEMBLY

    1. Pull the 4 fuel injectors out of the fuel delivery pipe.

      A00DT90E01

  6. REMOVE INTAKE MANIFOLD

    1. Disconnect the connector tube hose from the brake booster.

    2. A00DPL2

      Disconnect the wire harness clamp.

    3. Remove the 5 bolts and 2 nuts.

    4. A00DPWN

      Remove the 2 stud bolts and intake manifold.

    5. Remove the gasket from the intake manifold.

      A00DSWAE01

  7. REMOVE NO. 1 INTAKE MANIFOLD INSULATOR

    1. Remove the No. 1 intake manifold insulator from the cylinder block.

      A00DQQ5

  8. REMOVE ENGINE OIL LEVEL DIPSTICK

  9. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

    1. A005WIK

      Remove the bolt and guide.

    2. Remove the O-ring from the guide.

  10. REMOVE MANIFOLD STAY

    1. A005RTD

      Remove the bolt, nut and stay.

  11. REMOVE NO. 2 MANIFOLD STAY

    1. A005VJV

      Remove the bolt, nut and stay.

  12. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    1. A005SRN

      Remove the 3 bolts, nut and insulator.

  13. REMOVE EXHAUST MANIFOLD ASSEMBLY

    1. A005UCT

      Remove the 5 nuts, manifold and gasket.

  14. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR

    1. A005W8O

      Remove the 4 bolts and insulator.

  15. REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR

    1. A005V24

      Remove the 3 bolts and insulator.

  16. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

    1. A005TWF

      Remove the 2 bolts and insulator.

  17. REMOVE IDLER PULLEY BRACKET

    1. A00DR7Q

      Loosen the 2 bolts and remove the bracket together with the 2 bolts.

  18. REMOVE WATER INLET

    A005SMV

    1. Remove the 2 nuts and water inlet from the cylinder block.

  19. REMOVE THERMOSTAT

  20. REMOVE NO. 1 WATER BY-PASS PIPE

    1. A00DTDT

      Remove the bolt, 2 nuts, pipe and gasket.

  21. REMOVE NO. 1 TAPER SCREW PLUG

    1. A00DUVTE01

      Remove the plug from the cylinder block.

  22. REMOVE KNOCK SENSOR

    1. Disconnect the sensor connector.

      A00DT6PE01

    2. Remove the nut and sensor.

  23. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

    1. Disconnect the oil pressure switch connector.

    2. A005UR5

      Using a 24 mm deep socket wrench, remove the oil pressure switch.

  24. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

    1. Disconnect the sensor connector.

      A00DQDPE04

    2. Using SST, remove the sensor and gasket.

      SST
      09817-33190

  25. REMOVE RADIO SETTING CONDENSER

    1. A00DS8F

      Remove the bolt and radio setting condenser.