ДАТЧИК ПОЛОЖЕНИЯ РАСПРЕДВАЛА УСТАНОВКА

  1. INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)

    1. A005RLY

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A005VIQ

      Install the sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked or jammed during installation.

    3. Connect the sensor connector.

  2. INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)

    1. A005RLY

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A005RLN

      Install the sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked or jammed during installation.

    3. Connect the sensor connector.

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    1. A005VFG

      Установите крышку и введите в зацепление 4 фиксатора.

      Note

      • Проверьте надежность зацепления фиксаторов.

      • Во время зацепления фиксаторов на крышке не прикладывайте чрезмерных усилий и не допускайте ударов. Это может привести к поломке крышки.