ИНТЕГРИРОВАННОЕ РЕЛЕ УСТАНОВКА

  1. INSTALL INTEGRATION NO.1 RELAY

    1. Connect the 3 connectors.

    2. Attach the 2 claws to install the integration relay to the relay block.

      A00DRMV

  2. INSTALL RELAY BLOCK

    1. A00DSFU

      Attach the 4 claws to install the wire harness cover.

    2. Attach the 10 claws to assemble the upper side and lower side of the relay block cover.

      A00DQEF

      Note

      Securely assemble the relay block cover in order to prevent the wire harness from getting caught.

    3. Attach the guide and claw of the relay block.

      A00DUWGE01
      Text in Illustration
      *1 Guide
      *2 Clamp

    4. Install the 3 bolts.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

    5. Connect the 2 wire harness clamps.

    6. A00DPKI

      Connect the front speed sensor connector.

    7. A00DPNV

      for LHD:

      Connect the wireless door lock buzzer connector.

  3. CONNECT WIRE HARNESS

    1. A00DSKZ

      Attach the 2 clamps to connect the wire harness, and then install the 2 nuts.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

    2. Connect the 3 wire harness connectors to the engine room No. 1 relay block.

  4. INSTALL NO. 1 RELAY BLOCK COVER

  5. INSTALL FRONT FENDER LINER LH

    1. Установите левый передний подкрылок, закрепив его 8 фиксаторами.

      A003E2G

    2. Установите 5 новых уплотнительных шайб.

    3. Заверните 6 винтов.

      A003CAP

    4. Установите фиксатор штифта.

      A003B86

  6. INSTALL ECM

    1. Install the ECM Click here.