ДАТЧИК ПОЛОЖЕНИЯ КОЛЕНЧАТОГО ВАЛА ПРОВЕРКА

  1. INSPECT CRANKSHAFT POSITION SENSOR

    A005TLTE01
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Cold 985 to 1600 Ω
      Hot 1265 to 1890 Ω

      Note

      "Cold" and "Hot" refers to the temperature of the sensor. "Cold" is from -10 to 50°C (14 to 122°F) and "Hot" is from 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the crankshaft position sensor.