ДАТЧИК ПОЛОЖЕНИЯ РАСПРЕДВАЛА СНЯТИЕ

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    1. Remove the 2 nuts and engine cover.

      A005RNJ

  2. REMOVE AIR CLEANER CAP

    1. Disconnect the mass air flow meter connector and wire harness.

      A005VS4

    2. Disconnect the purge VSV.

    3. Disconnect the No. 2 ventilation hose from the cylinder head cover.

      A005VYI

    4. Disconnect the No. 2 fuel vapor feed hose from the air cleaner hose.

    5. Squeeze the tabs of the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.

    6. Unfasten the 3 hook clamps, and then remove the air cleaner cap and hose.

      A005R8E

  3. REMOVE CAMSHAFT POSITION SENSOR

    A005VVM

    1. Disconnect the sensor connector.

    2. Remove the bolt and sensor.