ПЕДАЛЬ АКСЕЛЕРАТОРА ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

  1. CHECK ACCELERATOR PEDAL ROD

    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / Accel Sensor Out No.1, Accel Sensor Out No.2.

    5. Read the value displayed on the intelligent tester.

      Standard Voltage
      Accelerator Pedal Condition Accel Sensor Out No.1 Accel Sensor Out No.2
      Released 0.5 to 1.1 V 1.2 to 2.0 V
      Depressed 2.6 to 4.5 V 3.4 to 4.9 V

      If the result is not as specified, check the accelerator pedal rod, wire harness and ECM.