ECM СНЯТИЕ

  1. REMOVE RADIATOR SUPPORT OPENING COVER

    1. A005RJS

      Remove the 9 clips and radiator support opening cover.

  2. REMOVE AIR CLEANER CAP

    1. A005T4U

      Disconnect the mass air flow meter connector.

    2. Loosen the air cleaner hose clamp.

    3. Unfasten the 3 hook clamps, and then remove the air cleaner cap.

    4. Remove the air cleaner filter element from the air cleaner case.

  3. REMOVE AIR CLEANER CASE

    1. Disconnect the engine wire.

      A005S4X

    2. Remove the 3 bolts and air cleaner case.

  4. DISCONNECT NO. 2 AIR CLEANER INLET

    1. A005UTF

      Remove the bolt and disconnect the No. 2 air cleaner inlet so that the ECM can be removed in the next step.

  5. REMOVE ECM

    1. Raise the 2 levers while pushing the locks on the 2 levers.

      Note

      Make sure that the lock lever is raised 90° as shown in the illustration before disconnecting the connectors. Failure to do this may cause the connectors to break.

      A005UVDE01

    2. Disconnect the 2 connectors and connector clamp.

    3. Remove the 2 bolts and ECM.

      A005V0A

    4. Remove the 4 screws and 2 ECM brackets.

      A005RMG