КОРПУС ДИФФЕРЕНЦИАЛА РАЗБОРКА

  1. REMOVE FRONT DIFFERENTIAL RING GEAR

    A00DPT6E04

    1. Place the matchmarks on the ring gear and differential case.

      Text in Illustration
      *1 Matchmark

    2. Remove the 10 bolts.

      A00DQJJE02

    3. Using a plastic-faced hammer, tap on the ring gear to remove it from the case.

      A00DUGDE01

  2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

    1. Using SST, remove the front differential case front tapered roller bearing from the differential case.

      A00DQSUE03
      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011 )
      09950-60010   ( 09951-00340 )

    2. Using SST, remove the front differential case tapered roller bearing front outer race.

      SST
      09387-00041   ( 09387-01030, 09387-01040, 09387-02010, 09387-02020 )
      A00DPM0E01

  3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

    1. Using SST, remove the front differential case rear tapered roller bearing from the differential case.

      A00DSVHE03
      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011 )
      09950-60010   ( 09951-00340 )

    2. Using SST, remove the front differential case rear tapered roller bearing rear outer race and shim.

      SST
      09387-00041   ( 09387-01030, 09387-01040, 09387-02010, 09387-02020 )
      A00DTUYE03

  4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

    1. Using a punch and hammer, loosen the staked part of the differential case.

      A00DPYCE01

    2. Using a 5 mm pin punch and hammer, tap out the pin from the ring gear side.

      A00DUMEE01

  5. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT

    1. Remove the front differential pinion shaft from the differential case.

      A00DUHFE01

  6. REMOVE FRONT DIFFERENTIAL SIDE GEAR

    1. Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.

      A00DUKXE01

  7. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL

    1. Place the transaxle case between aluminum plates in a vise.

      A00DV20E03

    2. Using SST and a hammer, tap out the oil seal.

      SST
      09308-00010

  8. REMOVE TRANSAXLE HOUSING OIL SEAL

    1. Place the transaxle housing between aluminum plates in a vise.

      A00DR2HE04

    2. Using SST and a hammer, tap out the oil seal.

      SST
      09308-00010