САЛЬНИК ДИФФЕРЕНЦИАЛА ЗАМЕНА

  1. REMOVE ENGINE ROOM SIDE COVER

    A005RE1

    1. Using a clip remover, remove the clip and engine room side cover.

  2. REMOVE FRONT LOWER BUMPER ABSORBER

    A00DUZW

    1. Remove the 2 screws and 4 bolts.

    2. Remove the 3 screws, 8 bolts and front lower bumper absorber.

      A00DTLK

  3. REMOVE NO. 1 ENGINE UNDER COVER (for 1AZ-FE)

    1. A005VAK

      Снимите 5 фиксаторов и защиту картера.

  4. REMOVE NO. 1 ENGINE UNDER COVER (for 3ZR-FE)

    1. Снимите 10 фиксаторов и защиту картера.

      A00ON3U

  5. DRAIN AUTOMATIC TRANSAXLE FLUID

    1. Remove the drain plug and gasket, and drain the ATF.

    2. Install a new gasket and the drain plug.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

  6. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH AND RH

    1. Remove the front drive shaft LH and RH Click here.

  7. REMOVE DRIVE SHAFT BEARING BRACKET

    1. Remove the 3 bolts and bracket.

  8. REMOVE TRANSAXLE HOUSING OIL SEAL LH AND RH

    A00OKJVE03

    1. Using SST, tap out the oil seal LH.

      SST
      09308-00010

    2. Using SST, tap out the oil seal RH.

      A00OHSIE03
      SST
      09308-00010

  9. INSTALL TRANSAXLE HOUSING OIL SEAL LH AND RH

    A00OIBKE01

    1. Coat the lip of a new oil seal LH with MP grease.

    2. Using SST and a hammer, tap in the oil seal LH.

      SST
      09649-17010
      09950-70010   ( 09951-07150 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Do not damage the oil seal lip.

    3. Coat the lip of a new oil seal RH with MP grease.

      A00OLAEE01

    4. Using SST and a hammer, tap in the oil seal RH.

      SST
      09316-60011   ( 09316-00011 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Do not damage the oil seal lip.

  10. INSTALL DRIVE SHAFT BEARING BRACKET

    1. Install the drive shaft bearing bracket with the 3 bolts.

      Torque:
      64 N*m  { 650 kgf*cm, 47 ft.*lbf }

  11. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH AND RH

    1. Install the front drive shaft LH and RH Click here.

  12. ADD AUTOMATIC TRANSAXLE FLUID

    Fluid type
    Toyota Genuine ATF WS

  13. INSPECT AUTOMATIC TRANSMISSION FLUID LEVEL

    1. Inspect the automatic transaxle fluid level Click here.

  14. INSTALL NO. 1 ENGINE UNDER COVER (for 1AZ-FE)

    1. A005VAK

      Закрепите защиту картера 5 фиксаторами.

  15. INSTALL NO. 1 ENGINE UNDER COVER (for 3ZR-FE)

    1. Закрепите защиту картера 10 фиксаторами.

      A00ON3U

  16. INSTALL FRONT LOWER BUMPER ABSORBER

    A00DTLK

    1. Install the front lower bumper absorber with the 8 bolts and 3 screws.

    2. Install the 2 screws and 4 bolts.

      A00DUZW

  17. INSTALL ENGINE ROOM SIDE COVER

    A005RE1

    1. Install the engine room side cover with the clip.